Line Card :: Gov/Edu Buyers :: Resellers

Contact Us:

(866) 933-4237

The part# with the prefix FCDUS159 has reached its end of life and has been superseded by the part# with the prefix FCDUS260.

OM4 LC LC Fiber Patch Cable | Bend Insensitive OFNP 100G DX 50/125 Multimode

$19.44

Part Number: FCDUS260v8921

In stock 492 Items

In stock

OM4 LC to LC Bend Insensitive Plenum 40/100Gb 50/125 Multimode Duplex Laser Optimized fiber optic cable with ceramic LC connectors. TAA Compliant, multimode fiber jumper that will extend your 100Gb reach up to 150 for ultra-long building backbones. An aqua colored, zip-cord fiber optic patch cord with 2.0mm outer diameter ofnp plenum rated jacket.

Length

Quantity

Add Compare

Security Policy
Delivery Policy
Return Policy

OM4 LC to LC Bend Insensitive 40/100Gb 50/125 Multimode Duplex Fiber Optic Cable. Accelerate your network performance and accommodate tight bend environments with this TAA Compliant, Bend Insensitive, plenum OM4 Laser-Optimized Fiber Optic Patch Cable.

A clean fiber optic cable installation starts with being able to put the cable exactly where you want it. A durable cable that’s flame retardant, UV resistant, immune to electrical interference and plenum rated (OFNP). A 10/40/100Gb, OM4 50/125 multimode duplex fiber optic cable that features Corning Optical Fiber cores that deliver data lightning fast with durable zip cord for increased strength. No matter the requirement, the bend insensitive cable will make your installation faster, cleaner, and more reliable. You’ll never want to use anything else.

This Bend Insensitive, aqua, 2.0mm outer diameter duplex fiber cable is terminated with small form factor 1.25mm LC ceramic ferrule connectors with easy to grab clips. TAA Compliant and designed for 40GBase-SR4 and 100GBase-SR10 ports and equipment. Supports high speed 10/40/100 Gigabit Ethernet, Fibre Channel and OIF applications.

Put this Bend Insensitive, high bandwidth, OM4 fiber cable exactly where you want to without fear of bend damage.

Each multimode (MM) fiber optic patch cable is individually tested by a qualified fiber optic technician then bagged and shipped with test results to your door. Cables over 35 meters may require an additional 1-2 days to ship.

Reference FCDUS260v8921

In stock 492 Items

Data sheet

Description: 10/40/100Gb Multimode 50/125 Duplex Fiber Optic Patch Cable / OM4 Fiber Jumper Cord
Product Type: Bend Insensitive Fiber Patch Cables
Cable Type: Male to Male Pre-Terminated, Bend Insensitive Fiber Optic Jumpers / Fibre Network Patch Cables
Termination: LC to LC Fiber Optic Cable
Connector 1: LC Duplex, 1.25mm form factor connector, ceramic ferrule.
Polish Connector 1: UPC (Ultra Physical Contact)
Connector 2: LC Duplex, 1.25mm form factor connector, ceramic ferrule.
Polish Connector 2: UPC (Ultra Physical Contact)
Max Connector Loss: 0.50 dB
Typical Connector Loss: 0.30 dB
Typical Return Loss: -25 dB
Optical Mode Type: OM4 Laser Optimized Multimode Fiber (LOMMF) - 50/125um core/cladding | 100G GbE 100GBase-SR10 150m, 40G GbE 40GBase-eSR4 QSFP+ 550m, 40G GbE 40GBase-SR4 150m, 10G GbE 10GBase-SR 400m, 1G GbE 1GBase-SX 550m (w/mode-conditioning).
Core / Cladding: 50/125µm - 50 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter)
Core Material: Corning Optical Fiber - Corning invented low-loss, high bandwidth, optical fiber and continues to deliver innovative glass solutions for fiber optic cables.
Mode Type: Multimode - Used for high speed fiber optic networking applications in buildings, datacenters, telecommunications, etc, also referred to as MM, MMode
Technology: Bend Insensitive / Laser-Optimized Multimode Fiber (LOMMF)
Network Speed: 10 Gb/s, 40 Gb/s, and 100 Gb/s Transmission (OM4)
1Gb Ethernet Dist: OM4 Distance is 1040 Meters at 850nm / 600 Meters at 1310nm.
10Gb Ethernet Dist: OM4 Distance is 550 Meters at 850 nm / 300 Meters at 1310 nm
Bandwidth: OM4 GbE Laser Optimized Fiber - 3500MHz-km @ 850nm, 4700MHz-km @1300nm | Optimized for VCSELS (vertical-cavity surface-emitting lasers).
Strand Count: 2 Fiber Strands
Jacket Color: Aqua - This is the standard jacket color for OM3/OM4 multimode fiber jumper cords / fiber patch cables.
Jacket Material: Plenum-rated (OFNP)
Jacket OD: 2.0mm Outer Diameter Jacket
UL Rating:: OFNP (Optical fiber, nonconductive, plenum) - Certified for use in plenum applications
Compliance: RoHS Compliant | TAA Compliant
Length Options: 0.5 Mtr, 1 Mtr, 2 Mtr, 3 Mtr, 4 Mtr, 5 Mtr, 6 Mtr, 7 Mtr, 8 Mtr, 9 Mtr, 10 Mtr, 12 Mtr, 15 Mtr, 20 Mtr, 25 Mtr, 30 Mtr, 35 Mtr, 40 Mtr, 45 Mtr, 50 Mtr, 55 Mtr, 60 Mtr, 65 Mtr, 70 Mtr, 75 Mtr, 80 Mtr, 85 Mtr, 90 Mtr, 95 Mtr, 100 Mtr
Quality Control: Fully inspected and tested in accordance with ANSI/TIA/EIA-455-171-A- 2001 attenuation standards by a qualified fiber optic technician.
Warranty: Lifetime - All FiberCablesDirect products come with a lifetime warranty. If it stops working when it shouldn't, we'll replace it free.
Current Specials: Free Shipping / Same Day Shipping available on fiber optic patch cable orders
Storage Temperature: -40° C to + 70° C
Operating Temperature: -20° C to + 70° C

Specific References

upc: 635635712204

View the trust certificate

Reviews subject to control

For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our CGU.
No inducements have been provided for these reviews
Reviews are published and kept for a period of five years
Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one
The reasons for deletion of reviews are available here.

5 /5

Based on 7 customer reviews