OM4 LC SC Fiber Patch Cable | Bend Insensitive OFNP 100G DX 50/125 Multimode

$19.44
FCDUS396v11471
484 Items
In stock

Made in USA

OM4 LC to SC Bend Insensitive Plenum 40/100Gb 50/125 Multimode Duplex Laser Optimized fiber optic cable with ceramic ferrule LC/SC connectors. A high bandwidth 50um, multimode fiber jumper allowing extended reach upwards of 150 meters at 100 Gb/s for ultra-long building backbones. An aqua, zip-cord fiber optic patch cord with 2.0mm outer diameter OFNP plenum rated jacket.

Length
Quantity

  • Security Policy
    Security Policy
  • Delivery Policy
    Delivery Policy
  • Return Policy
    Return Policy

OM4 LC to SC Bend Insensitive 40/100Gb 50/125 Multimode Duplex Fiber Optic Cable. Accelerate your network performance and accommodate tight bend environments with the Bend Insensitive OM4 Laser-Optimized Fiber Optic Patch Cable.

A clean fiber optic cable installation starts with being able to put the cable exactly where you want it. A durable cable that’s flame retardant, uv resistant, immune to electrical interference and is plenum rated (OFNP). This 40/100Gb OM4 50/125 multimode duplex fiber optic cable features Corning Optical Fiber that delivers data lightning fast and a durable zip cord for increased reliability. No matter the requirement, the bend insensitive cable will make your installation faster, cleaner, and more reliable. You’ll never want to use anything else.

This Bend Insensitive, aqua colored, 2.0mm outer diameter duplex fiber cable is terminated with small form factor 1.25mm LC ceramic ferrule connector and 2.5mm SC ceramic ferrule connector with easy to grab clips. TAA Compliant and designed for 40GBase-SR4 and 100GBase-SR10 ports and equipment. Supports high speed 10/40/100 Gigabit Ethernet, Fibre Channel and OIF applications.

Put this Bend Insensitive, high bandwidth, OM4 fiber cable exactly where you want to without fear of bend damage.

Each multimode (MM) fiber optic patch cable is individually tested by a qualified fiber optic technician then bagged and shipped with test results to your door. Cables over 35 meters may require an additional 1-2 days to ship.

FCDUS396v11471
484 Items

Data sheet

Description
10/40/100Gb Multimode 50/125 Duplex Fiber Optic Patch Cable / OM4 Fiber Jumper Cord
Product Type
Plenum OFNP Fiber Optic Patch Cable
Cable Type
Male to Male Pre-Terminated, Bend Insensitive Fiber Optic Jumpers / Fibre Network Patch Cables
Termination
LC to SC Fiber Optic Cable
Polish Type
UPC
Connector 1
LC Duplex, 1.25mm form factor connector, ceramic ferrule.
Polish Connector 1
UPC (Ultra Physical Contact)
Connector 2
SC Duplex, 2.5mm form factor connector, durable snap-in ceramic ferrule.
Polish Connector 2
UPC (Ultra Physical Contact)
Max Connector Loss
0.50 dB
Typical Connector Loss
0.30 dB
Typical Return Loss
-25 dB
Optical Mode Type
OM4 Laser Optimized Multimode Fiber (LOMMF) - 50/125um core/cladding | 100G GbE 100GBase-SR10 150m, 40G GbE 40GBase-eSR4 QSFP+ 550m, 40G GbE 40GBase-SR4 150m, 10G GbE 10GBase-SR 400m, 1G GbE 1GBase-SX 550m (w/mode-conditioning).
Core / Cladding
50/125µm - 50 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter)
Core Material
Corning Optical Fiber - Corning invented low-loss, high bandwidth, optical fiber and continues to deliver innovative glass solutions for fiber optic cables.
Mode Type
Multimode - Used for high speed fiber optic networking applications in buildings, datacenters, telecommunications, etc, also referred to as MM, MMode
Technology
Bend Insensitive / Laser-Optimized Multimode Fiber (LOMMF)
Network Speed
10 Gb/s, 40 Gb/s, and 100 Gb/s Transmission (OM4)
1Gb Ethernet Dist
OM4 Distance is 1040 Meters at 850nm / 600 Meters at 1310nm.
10Gb Ethernet Dist
OM4 Distance is 550 Meters at 850 nm / 300 Meters at 1310 nm
Bandwidth
OM4 GbE Laser Optimized Fiber - 3500MHz-km @ 850nm, 4700MHz-km @1300nm | Optimized for VCSELS (vertical-cavity surface-emitting lasers).
Strand Count
2 Fiber Strands
Jacket Color
Aqua - This is the standard jacket color for OM3/OM4 multimode fiber jumper cords / fiber patch cables.
Jacket Material
Plenum-rated (OFNP)
Jacket OD
2.0mm Outer Diameter Jacket
UL Rating:
OFNP (Optical fiber, nonconductive, plenum) - Certified for use in plenum applications
Compliance
RoHS Compliant | TAA Compliant
Length Options
0.5 Mtr, 1 Mtr, 2 Mtr, 3 Mtr, 4 Mtr, 5 Mtr, 6 Mtr, 7 Mtr, 8 Mtr, 9 Mtr, 10 Mtr, 12 Mtr, 15 Mtr, 20 Mtr, 25 Mtr, 30 Mtr, 35 Mtr, 40 Mtr, 45 Mtr, 50 Mtr, 55 Mtr, 60 Mtr, 65 Mtr, 70 Mtr, 75 Mtr, 80 Mtr, 85 Mtr, 90 Mtr, 95 Mtr, 100 Mtr
Quality Control
Fully inspected and tested in accordance with ANSI/TIA/EIA-455-171-A- 2001 attenuation standards by a qualified fiber optic technician.
Warranty
Lifetime - All FiberCablesDirect products come with a lifetime warranty. If it stops working when it shouldn't, we'll replace it free.
Current Specials
Free Shipping / Same Day Shipping available on fiber optic patch cable orders
Storage Temperature
-40° C to + 70° C
Operating Temperature
-20° C to + 70° C

Specific References

upc
670628017553

You might also like